For years there seemed to be only 1 trustworthy way for you to store info on your personal computer – utilizing a hard drive (HDD). Nonetheless, this sort of technology is already expressing its age – hard disks are loud and slow; they can be power–ravenous and are likely to produce quite a lot of heat in the course of serious procedures.

SSD drives, however, are really fast, consume a lot less energy and tend to be far less hot. They provide a completely new solution to file access and storage and are years in advance of HDDs in relation to file read/write speed, I/O operation as well as energy effectivity. See how HDDs stand up up against the modern SSD drives.

1. Access Time

Image

A result of a radical new method of disk drive operation, SSD drives enable for considerably faster data file accessibility rates. Having an SSD, data file access instances tend to be lower (only 0.1 millisecond).

Image

HDD drives still work with the same general data access technique which was actually developed in the 1950s. Although it was considerably upgraded since then, it’s slower as compared with what SSDs will provide. HDD drives’ data access rate ranges between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is really important for the performance of any data storage device. We have carried out extensive assessments and have established that an SSD can deal with no less than 6000 IO’s per second.

Image

Having an HDD drive, the I/O performance gradually improves the more you use the hard drive. Nonetheless, once it gets to a particular limit, it can’t proceed swifter. And due to the now–old technology, that I/O limitation is significantly lower than what you could get with a SSD.

HDD are only able to go so far as 400 IO’s per second.

3. Reliability

Image

SSD drives are meant to include as less rotating components as is feasible. They utilize an identical technique like the one found in flash drives and are generally significantly more dependable as compared to regular HDD drives.

SSDs provide an common failure rate of 0.5%.

Image

Since we have previously observed, HDD drives depend on spinning disks. And something that takes advantage of many moving parts for lengthy intervals is vulnerable to failing.

HDD drives’ common rate of failing varies somewhere between 2% and 5%.

4. Energy Conservation

Image

SSD drives function virtually noiselessly; they don’t generate excessive warmth; they don’t involve additional air conditioning methods and then consume significantly less electricity.

Tests have demostrated that the average electricity use of an SSD drive is somewhere between 2 and 5 watts.

Image

HDD drives can be known for being noisy; they can be at risk of getting hot and whenever you have several disk drives in a single hosting server, you must have a further air conditioning device used only for them.

In general, HDDs take in between 6 and 15 watts.

5. CPU Power

Image

SSD drives allow for swifter data file accessibility rates, which, subsequently, enable the CPU to accomplish data file requests considerably faster and after that to return to other responsibilities.

The standard I/O hold out for SSD drives is simply 1%.

Image

HDD drives accommodate sluggish accessibility rates as opposed to SSDs do, which will result in the CPU being forced to wait around, although scheduling allocations for the HDD to find and return the inquired data.

The normal I/O delay for HDD drives is about 7%.

6.Input/Output Request Times

Image

Almost all of ProtoHost’s brand–new servers are now using only SSD drives. Our personal tests have shown that by using an SSD, the normal service time for an I/O request although performing a backup continues to be below 20 ms.

Image

With the same server, but this time equipped with HDDs, the outcome were completely different. The common service time for an I/O call fluctuated in between 400 and 500 ms.

7. Backup Rates

Image

You are able to experience the real–world advantages of using SSD drives day after day. For example, on a hosting server with SSD drives, a complete backup can take just 6 hours.

Image

We used HDDs exclusively for quite a while and we have decent understanding of how an HDD runs. Generating a backup for a web server equipped with HDD drives can take around 20 to 24 hours.

The Linux VPS web hosting services and then our normal shared hosting services accounts offer SSD drives automatically. Be part of our family here, at ProtoHost, and see the way we can assist you boost your web site.


  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is configured for you free. 99.9% network uptime. Full root and SSH access.
  • Compare our prices

  •  
  • Examine the instruments and characteristics offered by our Virtual Private Servers. You can start off with a smaller VPS Web Hosting package and upgrade with only a click of the mouse as your needs expand.
  • Compare our hosting plans
  • Contact Us

  •  
  • You are able to make contact with us 24 hours by email or by using our really–fast ticketing system. We provide a 1–hour reply time guarantee.